scroll_watch_design_takes_you_back_and_forward_in_time_00

Scroll Watch Design Takes You Back and Forward in Time

Design submitted by Peter from the UK.

Peter says: “This is “Scroll” and as the name suggests this design was inspired by the form of ye olde worlde rolled up parchment. The basic form consists of two round dials with scroll like discs for hands.

The time telling method is very simple: the top dial displays the hours and the lower the minutes in an analogue style, powered by two traditional analogue mechanical movements.

The scrolled hands are essentially a helixed surface. The leading edge acts as the hand to point out the time. The front leading face would be illumintated at a touch of one of the buttons mounted top and botton of the two dials for poor light conditions.

This design has a steampunk feel, especially in the distressed steel material. As a result it will hopefully appeal to people with a taste for industrial styling and mechanical movements.

The watch is very simple both in form and in use so may appeal to people who like no frills minamalistic design.┬áThe simple form and function combined with the feasibilty helps this design stand out from others. The design is simple and would allow for traditional manufacturing techniques and process which increase the viability.”

Let Peter know how you feel about his design in the comments section below. What do you like about it? What would you do, if anything to improve this design?

scroll_watch_design_takes_you_back_and_forward_in_time_overviewscroll_watch_design_takes_you_back_and_forward_in_time_overviewscroll_watch_design_takes_you_back_and_forward_in_time_timescroll_watch_design_takes_you_back_and_forward_in_time_hoursscroll_watch_design_takes_you_back_and_forward_in_time_dialsscroll_watch_design_takes_you_back_and_forward_in_time_rear_viewscroll_watch_design_takes_you_back_and_forward_in_time_front_view

37 thoughts on “Scroll Watch Design Takes You Back and Forward in Time”

  1. I’d wear it Pete. It looks pretty cool! Different to TF’s existing designs for sure. It’s always nice to see a design that’s easy to read too. 5 stars and Yes!

    Like

    1. hehe it must be on the weird side if you would wear it! lol I know you like the more unusual designs.
      Yeah time reading doesn’t get much simpler. Thanks for the positive comment and vote! :D

      Like

  2. Very nice dual analog watch! Steampunky and minimalistic do work together very well for me. Mhh just imagine these two circles on the wrist… 5┬░/YES

    Like

    1. Yeah this one is back to basics fun with a retro feel, I wanted to come up with something that was very easy to make but looked different. Im glad it appeals! Thanks a lot for the comment and the stars! :D

      Like

    1. I hadn’t seen that before, its very pretty indeed. I dont think that the helixed hand is anything new, buts its definately cool! Thanks for taking the time to comment even tho there is preferable designs out there for you. :D

      Like

  3. Its a cool design, but will take a lot of power to turn those plates,
    also its very big, maybe you can figure out to tell the time with 1 plate?
    further good job and the best of luck!

    Like

    1. I think if each disc is powered by one movement that it shouldnt be a problem, depends on what they are made of I guess. You could tell the time in a more conventional way like the one Timo linked too but it would stray away form the original inspiration. Size wise, yeah my images make it look large but the proportions could easily be tweaked to give it more mass appeal. Thanks for the feedback Befrey! :D

      Like

      1. Im pretty easy regarding the details, so it wouldn’t need to be a disc. Would it still be the same concept with more traditional hands? I dunno. Thanks for the feedback! :D

        Like

      2. Usually those type of watch have two movements. ( I think ! based on the Marvin M014/M024 ) The choice of the material and it’s thickness is important, because if it’s too heavy, the movement souldn’t work.

        Like

      3. Yeah two movements seemed the simplest way around the two dials situation without having to search for a suitable duel movement or the cost of developing a gearbox to power the two displays. I imagined a lightweight plastic for the discs, the satin finish looks nice with a metallic case. The discs could have cut outs to let the light through from underneath. Alternatively they could be a clear plastic with a coating over the majority excluding the illuminated parts which would give a similar effect. Thanks for the feedback!

        Like

  4. Hmmmm…. It doesn’t look like a scroll, but a steam-punk goggle. Futuristic binocular also yes. I love this to be a single display though, like the link above suggested, but that’ll make it other design. Still a good design. If wearing this, I have to move to Texas ;-)

    Like

    1. I will happily go with steampunkt google. Yeah I think making it only one dial would be too similar to that other design. I might do a mkII version that Is a bit more slim line and sleek! I don’t understand the Texas link but I thank you for your comment! :D

      Like

  5. I like this, it looks industrial in a way but is also modern and stylish, and finished very well, a stand alone piece of trendy jewellery. Nice job.
    Diane.

    Like

    1. Yeah it might be too industrial for some peoples tastes but I could imagine it looking pretty cool if it was ever made, especially after TF worked their magic on it. Hopefully like you they will see the potential.
      Thank you very much for your positive comment! :D

      Like

  6. It makes me mad that some published designs, which I think are bad ideas, have high scores, and other ideas like this that I find VERY good and original, and have a lower score :(
    2.7? should be above 4.5!

    I love this one Pete, although the render’s “graphic style” not much, but I love the idea :)
    5* and Yes (and if I had money, I’d buy several :D)
    Good luck!

    Like

    1. Thats very kind of you to say Ignatius! The score does seem a little harsh, but some people perhaps cant see past the “graphic style”. I am currently working on an updated version which hopefully will be added here soon (in regular rendering style! lol)
      Hopefully one day you will get the opertunity to buy! (assuming TF see past the ratings)
      Thanks for the great comment! :D

      Like

      1. An design is a design,
        maybe ppl got a bit scared of the cartoony look.
        because of that “fear”they find it bad presented.
        and this is a good design, there are some flaws, and its for a very specific group of ppl.

        And ignatius, a good presented, bad design can be rated higher then a rly good, bad presented design.
        Its moslty the mind of the ppl and how you can trick them.

        Like

  7. this is awesome it could work with LCD, its a simple idea, but TF doesnt have a like this cool before. seriously, why isnt it over 4 stars?

    Like

    1. Yeah you could achieve a similar effect with a LCD but it might loose some charm. I’m glad you like it. Hopefully TF will see past the low ratings. Thanks for positive comment! :D

      Like

  8. I love dual-dial watches. ( like the Marvin M014/M024 & the Rolex Cellini Prince ). I would buy even if it was two hand instead of helixed surface.

    Like

    1. You know more than me regarding the movement side of things! (thats not difficult! lol) Im glad you like it!
      Yeah I think it would look cool with more conventional hands too. Thanks for the feedback and the comments! :D
      Keep your eye out for MKII when it eventually hits the blog!

      Like

      1. Helixed surface make it more steampunk. But the weight have to be equallly distributed around the disk, be as light as possible and need a higher torque movement because if it’s like a turning-disc clock, a normal one will do this : when the weight is higher at the 3 o’clock position it will pull the weight down at the 6 o’clock and when the movement will want to get the time at 7 o’clock the weight will pull it down and destroy the movement. A single-hand display don’t have this problem.
        ( I learned that the last year when I planned to do a turning-disk clock )

        Like

  9. Time is about to run out on this post, so thanks to everyone who voted, commented and shared.
    Keep your eyes peeled for the MkII version when it hits the blog. Hopefully it will strike more of a cord than this version did.

    Pete from the UK :D

    Like

Comments are closed.